Active Test

ACTIVE TEST

HINT: Performing the ACTIVE TEST using the intelligent tester allows the relay, VSV, actuator and so on to operate without parts removal. Performing the ACTIVE TEST as the first step of troubleshooting is one way to shorten labor time.
It is possible to display the DATA LIST on the intelligent tester during the ACTIVE TEST.

a. Connect the intelligent tester to the DLC3.
b. Turn the ignition switch to the ON position.
c. Turn the tester ON.
d. Enter the following menus: DIAGNOSIS / OBD/ MOBD / AIR CONDITIONER / ACTIVE TEST.




e. Check the value(s) by referring to the table.