System Description

SYSTEM DESCRIPTION














1. METER GAUGE






HINT:
- The multi-information display has been located in the center of the combination meter assembly.
- The display shows a message or animation for each of the functions described in the table.




2. INTEGRATION CONTROL & PANEL ASSEMBLY (W/O NAVIGATION SYSTEM)/MULTI-DISPLAY (W/ NAVIGATION SYSTEM)






HINT:
- Integration control & panel assembly (*1) consists of three parts (driver monitor display, passenger information display, and heater control panel). These areas display the contents given in the table.
- Multi-display assembly (*2) consists of four parts (navigation display, passenger information display, clock display, and heater control panel). These areas display the contents given in the table.




3. Multi-Information Display Flow Chart
*1: w/ Sliding Roof Control System
*2: The display immediately before turning the ignition switch off will appear when the ignition switch is turned to the ON position.
*3: The display is switched in order shown above by pushing the "DISP" switch on the steering pad switch.
*4: If the abnormal condition is detected, the warning display appears immediately. (w/ buzzer).
*5: U.S.A. only.




4. MAINTENANCE MODE

HINT: MAINTENANCE MODE is the secret mode




5. DIAGNOSIS SYSTEM

HINT:
- The multi-information display shows "DIAG" when the ignition switch is turned to the ON position
- Diagnosis checks for the VSC system can be done by using the displayed items is in the multi-information display.