Removal and Installation
COMBINATION METERREMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
a. Disengage the 4 clips and remove the instrument cluster finish panel sub-assembly.
3. REMOVE COMBINATION METER ASSEMBLY
a. Remove the 4 screws.
b. Pull out the combination meter assembly, and disconnect the connectors.
INSTALLATION
1. INSTALL COMBINATION METER ASSEMBLY
a. Connect the connectors.
b. Install the combination meter assembly with the 4 screws.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
a. Engage the 4 clips and install the instrument cluster finish panel sub-assembly.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal.