Removal and Installation
REMOVAL1. REMOVE FRONT BUMPER STAY CENTER
2. REMOVE FRONT BUMPER ASSEMBLY
3. REMOVE HEADLIGHT ASSEMBLY
a. Remove the 3 screws.
b. Pull out the headlight assembly forward, then release the headlight bracket.
c. Disconnect each connector and separate the headlight assembly.
d. Remove the clamp and headlight assembly.
4. REMOVE FRONT NO.2 BUMPER SIDE SUPPORT
a. Using needle nose pliers, release the 2 claw fittings and remove the front No.2 bumper side support from the headlight assembly.
INSTALLATION
1. INSTALL FRONT NO.2 BUMPER SIDE SUPPORT
2. INSTALL HEADLIGHT ASSEMBLY
3. INSTALL FRONT BUMPER ASSEMBLY
4. INSTALL FRONT BUMPER STAY CENTER
5. VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT
6. PREPARATION FOR HEADLIGHT AIMING (Using a tester)
7. PREPARATION FOR HEADLIGHT AIMING (Using a screen)
8. HEADLIGHT AIMING INSPECTION
9. HEADLIGHT AIMING ADJUSTMENT