Canada - Body - Initialization of Moon Roof
Bulletin2319
Issue Date
August 30, 2006
Title
INITIALIZATION OF MOON ROOF DURING PDS
Component
GENERAL INFORMATION
Models
'07 GX 470
INTRODUCTION:
This bulletin outlines the initialization procedure for the moon roof on the 2007 model year GX 470.
If the battery has been disconnected, the moonroof ECU will not be able to detect and memorize the moonroof positions, resulting in the following features being inoperative.
- One--touch slide open and close of moon roof with jam protection.
- One--touch tilt up and down of moon roof with jam protection.
Use the following procedure to initialize the moon roof during PDS and whenever the battery has been disconnected.
APPLICABLE VEHICLES:
- 2007 model year GX 470 vehicles.
INITIALIZATION PROCEDURE:
1. Turn ignition switch to the "ON" position.
2. Push and hold the �TILT UP" side of the switch until the moon roof tilts all the way up and then tilts down slightly (approximately 10 mm at the rear).
3. Check for proper operation of the "one--touch slide open/close" and "one--touch tilt up/down" functions by pushing the switch briefly to the "SLIDE OPEN" and "TILT UP" positions.
NOTE:
Jam protection function becomes effective through the above initialization procedure.
WARRANTY INFORMATION: