Removal and Replacement

Fog Light Assembly:

FOG LIGHT ASSEMBLY

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT BUMPER ASSEMBLY
3. REMOVE FOG LIGHT ASSEMBLY




a. Remove the screw.
b. Disengage the claw and remove the fog light assembly.

INSTALLATION

1. INSTALL FOG LIGHT ASSEMBLY




a. Engage the claw and install the fog light assembly.
b. Install the screw.

2. INSTALL FRONT BUMPER ASSEMBLY
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT
5. PREPARE FOR FOG LIGHT AIMING
6. INSPECT FOG LIGHT AIMING
7. ADJUST FOG LIGHT AIMING
8. PERFORM INITIALIZATION