Interior Lamp Circuit

Interior Light Circuit

DESCRIPTION
The Multiplex Network Body ECU controls the following illumination light.
1. Room light assembly No. 1 (Interior light) with DOOR position
2. Map light assembly (Personal light)
3. Transponder key amplifier (Ignition key cylinder light)

Wiring Diagram:

INSPECTION PROCEDURE

HINT: Start the inspection from step 1 in the case of using the intelligent tester, and start from step 2 in the case of not using the intelligent tester.

Step 1:

Step 1 (Continued)-2:

Step 3:

Step 3 (Continued):