Remote Switch: Service and Repair

Steering Pad Switch:

STEERING PAD SWITCH

REMOVAL

1. SEPARATE BATTERY NEGATIVE TERMINAL
2. REMOVE STEERING WHEEL COVER LOWER NO. 2
3. REMOVE STEERING WHEEL COVER LOWER NO. 3
4. REMOVE STEERING PAD ASSEMBLY
5. REMOVE STEERING PAD SWITCH LH (without Navigation System)

a. Disconnect the connector.
b. Disconnect the connector of cruise control main switch.
c. Remove the screw.

d. Disengage the meshing of 2 pins and remove the steering pad switch LH.

6. REMOVE STEERING PAD SWITCH LH (with Navigation System)

a. Disconnect the connector.
b. Disconnect the connector of cruise control main switch.
c. Remove the screw.

d. Remove the clamp.
e. Disengage the 2 pins and release the steering pad switch LH from the steering wheel.

f. Release the tab of steering pad switch cable from the steering pad switch LH as shown in the illustration.

g. Disengage the 2 claws as shown in the illustration and open the latch on the top of the connector.

h. Pull out the connector while pinching the latch with fingers and disconnect the steering pad switch cable from the steering pad switch LH.

7. REMOVE STEERING PAD SWITCH RH

a. Remove the screw.
b. Remove the clamp.
c. Disengage the 2 pins and release the steering pad switch RH from the steering wheel.

d. Release the tab of steering pad switch cable from the steering pad switch RH as shown in the illustration.

e. Disengage the 2 claws as shown in the illustration and open the latch on the top of the connector.

f. Pull out the connector while pinching the latch with fingers and disconnect the steering pad switch cable from the steering pad switch RH.

INSTALLATION

1. INSTALL STEERING PAD SWITCH RH
2. INSTALL STEERING PAD SWITCH LH (with Navigation System)
3. INSTALL STEERING PAD SWITCH LH (without Navigation System)
4. INSTALL STEERING PAD ASSEMBLY
5. INSTALL STEERING WHEEL COVER LOWER NO. 3
6. INSTALL STEERING WHEEL COVER LOWER NO. 2
7. CONNECT BATTERY NEGATIVE TERMINAL
8. INSPECT STEERING PAD ASSEMBLY
9. INSPECT SRS WARNING LIGHT