Ignition Switch: Service and Repair

Ignition Switch:

Ignition Switch:

IGNITION SWITCH

REMOVAL

1. REMOVE STEERING COLUMN COVER
2. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY




a. Disconnect the ignition switch connector and unlock warning switch connector.
b. Remove the clamp.
c. Remove the 2 screws and ignition switch.

INSTALLATION

1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY




a. Install the ignition switch with the 2 screws.
b. Install the clamp.
c. Connect the un-lock warning switch connector.

2. INSTALL STEERING COLUMN COVER
a. Install the steering column cover.