Ride Height Sensor: Service and Repair
REMOVAL1. REMOVE REAR DISC WHEEL
2. REMOVE HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR LH
a. Disconnect the connector from the height control sensor.
b. Place matchmarks on the link and bracket.
c. Remove the nut and disconnect the sensor link.
d. Remove the 2 bolts and height control sensor.
INSTALLATION
1. INSTALL HEIGHT CONTROL SENSOR SUBASSEMBLY REAR LH
a. Install the height control sensor with the 2 bolts.
Torque: 13 N.m (133 kgf.cm, 10 ft.lbf)
b. Align the matchmarks on the link and the bracket.
c. Connect the sensor link with the nut.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
d. Connect the connector to the height control sensor.
2. INSTALL REAR DISC WHEEL
Torque: 112 N.m (1,140 kgf.cm, 83 ft.lbf)
3. MEASURE VEHICLE HEIGHT
4. ADJUST VEHICLE HEIGHT