Ride Height Sensor: Testing and Inspection

INSPECTION

1. INSPECT HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR




a. Remove the height control sensor sub-assembly rear LH or RH.
b. Connect 3 dry batteries of 1.5 V in series.




c. Height control sensor sub-assembly rear LH: Connect terminal 1 (SHB) to the batteries' positive (+) terminal, and terminal 3 (SHG) to the batteries' negative (-) terminal, then apply approximately 4.5 V between terminal 2 (SHRL) and 3 (SHG) in the following conditions.




d. Height control sensor sub-assembly rear RH: Connect terminal 1 (SHB) to the batteries' positive (+) terminal, and terminal 3 (SHG) to the batteries' negative (-) terminal, then apply approximately 4.5 V between terminal 1 (SHG) and 2 (SHRR) in the following conditions.