Acceleration Sensor

REMOVAL

1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE LH
3. REMOVE COWL SIDE TRIM BOARD LH
4. REMOVE INSTRUMENT PANEL UNDER COVER SUBASSEMBLY NO. 1
5. REMOVE INSTRUMENT PANEL FINISH PLATE
6. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER
7. REMOVE INSTRUMENT PANEL LOWER LH
8. REMOVE FRONT ACCELERATION SENSOR




a. Disconnect the connector from the front acceleration sensor.
b. Remove a bolt and the acceleration sensor.

9. REMOVE NO. 2 REAR SEAT ASSEMBLY LH
10. REMOVE QUARTER SCUFF PLATE INSIDE LH
11. REMOVE REAR DOOR SCUFF PLATE LH
12. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
13. REMOVE BACK DOOR WEATHERSTRIP
14. REMOVE REAR FLOOR MAT SUPPORT PLATE REAR
15. REMOVE QUARTER INSIDE TRIM BOARD LH
16. REMOVE REAR ACCELERATION SENSOR




a. Disconnect the connector.
b. Remove a clip, bolt and the rear acceleration sensor.

INSTALLATION

1. INSTALL REAR ACCELERATION SENSOR

a. Install the rear acceleration sensor with a clip and a bolt.

Torque: 7.8 N.m (80 kgf.cm, 69 in.lbf)

b. Connect the connector.

2. INSTALL QUARTER INSIDE TRIM BOARD LH
3. INSTALL REAR FLOOR MAT SUPPORT PLATE REAR
4. INSTALL BACK DOOR WEATHERSTRIP
5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
6. INSTALL REAR DOOR SCUFF PLATE LH
7. INSTALL QUARTER SCUFF PLATE INSIDE LH
8. INSTALL NO. 2 REAR SEAT ASSEMBLY LH
9. INSTALL FRONT ACCELERATION SENSOR

a. Install the front acceleration sensor with a bolt.

Torque: 7.8 N.m (80 kgf.cm, 69 in.lbf)

b. Connect the connector to the front acceleration sensor.

10. INSTALL INSTRUMENT PANEL LOWER LH
11. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER
12. INSTALL INSTRUMENT PANEL FINISH PLATE
13. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY NO. 1
14. INSTALL COWL SIDE TRIM BOARD LH
15. INSTALL FRONT DOOR SCUFF PLATE LH