Kinetic Dynamic Suspension System
Clearing the DTCs using the SST check wire.1. Make sure that the ignition switch is off.
2. Using SST, connect terminals TC and CG of the DLC3.
SST 09843-18040
3. Turn the ignition switch to the ON position.
4. Clear DTCs stored in the ECU by depressing the brake pedal 8 times or more within 5 seconds.
5. Check that the KDSS indicator light shows a normal system code.
HINT: If the fault has not been repaired, the DTC code may still be displayed.
6. Turn the ignition switch off.
7. Remove the SST check wire from the DLC3.
SST 09843-18040
HINT: Disconnecting the battery cable during the operation will not erase DTCs in the ECU.