Operation CHARM: Car repair manuals for everyone.

Operation Check

OPERATION CHECK





1. CHECK WINDOW LOCK SWITCH
a. Check that operation of the door glasses except the driver side door glass and the roof glass is disabled when the window lock switch of the power window master switch is pressed.
b. Check that the door glasses and the roof glass can be operated when the window lock switch is pressed again.

2. CHECK MANUAL UP/DOWN FUNCTION
a. Check that the driver side power window operates as follows:





b. Check that the power windows except the driver side power window operate as follows:





3. CHECK AUTO UP/DOWN FUNCTION
a. Check that the driver side power window operates as follows:





b. Check that the power windows except the driver side power window operate as follows:





4. CHECK REMOTE MANUAL UP/DOWN FUNCTION
a. Check that the power windows except the driver side power window operate as follows:





5. CHECK REMOTE AUTO UP/DOWN FUNCTION
a. Check that the power windows except the driver side power window operate as follows:





6. CHECK MANUAL UP/DOWN FUNCTION VIA DRIVER SIDE DOOR LOCK KEY CYLINDER
a. Check that all door glasses and sliding roof operate as follows, when the key is inserted into the key cylinder.





7. CHECK MANUAL DOWN FUNCTION VIA TRANSMITTER
a. Check that all door glasses and sliding roof operate as follows, when operating the transmitter.





8. CHECK POWER WINDOW OPERATION FUNCTION AFTER IGNITION OFF
a. When both of the following conditions are fulfilled, check that the door glasses, the back door glass and the sliding roof can be operated even after the ignition switch is turned OFF:
1. Within 45 seconds after the ignition switch is turned OFF.
2. All the doors are closed.





9. CHECK JAM PROTECTION FUNCTION

HINT: The jam protection function prevents any part of your body from getting caught by accident between the door frame and the door glass during power window operation.

a. Check that the door glass goes down by approximately 50 mm (2.0 in.) right when something gets caught between the door frame and the door glass during power window operation. However, when the opening between the door frame and the door glass is less than 200 mm (7.9 in.), the door glass keeps going down until the opening reaches 200 mm (7.9 in.) and stops there.

Operative condition:
- AUTO UP
- AUTO UP function after the ignition switch is turned OFF
- MANUAL UP function after the ignition switch is turned OFF
- MANUAL UP function via the driver side door lock key cylinder