Park/Neutral Position Switch Circuit
Park / Neutral Position Switch CircuitDESCRIPTION
This circuit sends a signal of the Park/Neutral Position switch (Neutral or other) to the Windshield Wiper ECU, and the Park/Neutral Position switch (Park or other) to the Multiplex Network Body ECU.
HINT: Refer to the Automatic Transmission section for the PNP switch check.
Wiring Diagram (Part 1):
Wiring Diagram (Part 2):
Step 1-2:
Step 2 (Continued):
INSPECTION PROCEDURE
HINT: Start the inspection from step 1 in the case of using the intelligent tester, and start from step 2 in the case of not using the intelligent tester.