Reassembly

ENGINE HOOD / DOOR: HOOD:

REASSEMBLY

1. INSTALL HOOD LOCK ASSEMBLY






(a) Connect the connector and the cable.
(b) Install the hood lock assembly with the 3 bolts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(c) Install a nut cap.
2. INSTALL HOOD LOCK CONTROL CABLE COVER
3. INSTALL COOL AIR INTAKE DUCT SEAL
4. INSTALL HOOD HINGE ASSEMBLY LH






(a) Install the hood hinge assembly LH with the 2 bolts.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
5. INSTALL HOOD HINGE ASSEMBLY RH
(a) Install the hood hinge assembly RH with the 2 bolts.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
6. INSTALL HOOD SUB-ASSEMBLY






(a) Install the hood sub-assembly with the 2 bolts.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
HINT: Use the same procedure for removal on the RH side.

7. INSTALL HOOD TO FRONT FENDER SEAL RH
8. INSTALL HOOD TO FRONT FENDER SEAL LH
9. INSTALL HOOD TO RADIATOR SUPPORT SEAL
10. INSTALL HOOD SUPPORT ROD
11. INSTALL HOOD INSULATOR
12. INSTALL RADIATOR GRILLE
13. INSTALL HOOD AUXILIARY CATCH HOOK ASSEMBLY
14. INSTALL AUXILIARY CATCH RELEASE LEVER ASSEMBLY






(a) Install the auxiliary catch release lever assembly and hood auxiliary catch hook assembly as a unit with the 3 bolts.
Torque: 7.0 Nm (71 kgf-cm, 62 in-lbf)