Reassembly

ENGINE HOOD / DOOR: BACK DOOR:

REASSEMBLY

1. INSTALL DOOR PULL HANDLE
2. INSTALL POWER BACK DOOR CONTROL SWITCH ASSEMBLY (w/ Power Back Door)
3. INSTALL POWER BACK DOOR WARNING BUZZER (w/ Power Back Door)
4. INSTALL LICENSE PLATE LIGHT ASSEMBLY Installation

5. INSTALL TELEVISION CAMERA (w/ Rear View Monitor) Installation

6. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY
7. INSTALL BACK DOOR GARNISH

8. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)






(a) Install a new clip to the power back door sensor assembly LH.






(b) Using a "torx" socket wrench (T30), install the power back door sensor assembly LH with the 3 bolts and the clip.
Torque: 3.5 Nm (36 kgf-cm, 31 in-lbf)
(c) Connect the connector.
9. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)






(a) Install a new clip to the power back door sensor assembly RH.






(b) Using a "torx" socket wrench (T30), install the power back door sensor assembly RH with the 3 bolts and the clip.
Torque: 3.5 Nm (36 kgf-cm, 31 in-lbf)
(c) Connect the connector.
10. INSTALL BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)
(a) Apply body grease to the sliding parts on the back door lock assembly.






(b) Install the back door lock assembly with the 4 bolts.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
(c) Install the clamp.
(d) Connect each connector and the link rod.
11. INSTALL BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)
(a) Apply body grease to the sliding parts on the back door lock assembly.






(b) Install the back door lock assembly with the 3 bolts.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
(c) Install the clamp.
(d) Connect the connector and the link rod.
12. INSTALL BACK DOOR LOCK COVER
13. INSTALL BACK DOOR TRIM SPACER (LH Side)
14. INSTALL BACK DOOR TRIM SPACER (RH Side)
15. INSTALL REAR SPOILER SUB-ASSEMBLY Installation

16. INSTALL BACK DOOR TRIM COVER LH
17. INSTALL BACK DOOR TRIM COVER RH
18. INSTALL BACK-UP LIGHT ASSEMBLY LH Installation

19. INSTALL BACK-UP LIGHT ASSEMBLY RH Installation

20. INSTALL REAR WIPER MOTOR ASSEMBLY Installation

21. INSTALL BACK DOOR TRIM PANEL ASSEMBLY
22. INSTALL BACK DOOR TRIM PANEL ASSEMBLY UPPER
23. INSTALL BACK WINDOW PANEL TRIM UPPER (w/ Power Back Door)
24. INSTALL BACK DOOR TRIM BOARD (w/ Power Back Door)
25. INSTALL BACK WINDOW PANEL TRIM UPPER (w/o Power Back Door)
26. INSTALL REAR NO.1 WIPER LINK PIVOT WASHER Installation

27. INSTALL REAR NO.1 WIPER LINK PIVOT NUT Installation

28. INSTALL REAR WIPER SHAFT COVER Installation

29. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY Installation

30. INSTALL REAR WIPER ARM COVER Installation

31. BACK DOOR CLOSER SYSTEM INITIALIZATION
Back Door Closer System
32. POWER BACK DOOR SYSTEM INITIALIZATION
Initialization
33. ELECTRICAL BACK DOOR OUTSIDE HANDLE SYSTEM INITIALIZATION
Electrical Back Door Outside Handle System