Power Back Door System

ENGINE HOOD / DOOR: POWER BACK DOOR SYSTEM:

DTC CHECK / CLEAR

1. CHECK DTC
(a) Connect the Techstream with CAN VIM to the DLC3.
(b) Turn the ignition switch ON.
(c) Read the DTC by following the prompts on the tester screen.
HINT: Refer to the Techstream operator's manual for further details.

2. CLEAR DTC
(a) Connect the Techstream with CAN VIM to the DLC3.
(b) Turn the ignition switch ON.
(c) Erase the DTC by following the directions on the tester screen.
HINT: Refer to the Techstream operator's manual for further details.