Power Back Door System

ENGINE HOOD / DOOR: POWER BACK DOOR SYSTEM:

DATA LIST / ACTIVE TEST

1. READ DATA LIST
HINT: Using the Techstream DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

(a) Connect the Techstream with CAN VIM to the DLC3.
(b) Turn the ignition switch ON.
(c) Read the DATA LIST

Back Door (Power Back Door ECU):









HINT:
- *1: RATCHET appears on the display of the Techstream, however, the name of the part corresponding to the display of the tester is "half-latch".
- *2: In the case where the CAUTION is displayed even without applying resistance in each range, a foreign object may get caught in that range.
- *3: "0.0s" appearing on the display of the Techstream means that a 1-press of the satellite switch operates the power back door.
- *4: MAIN appears on the display of the Techstream, however, the name of the part corresponding to the display of the tester is "power back door main switch".

Main Body (Body ECU):





2. PERFORM ACTIVE TEST
HINT: Performing the Techstream ACTIVE TEST allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

(a) Connect the Techstream with CAN VIM to the DLC3.
(b) Turn the ignition switch ON.
(c) Perform the ACTIVE TEST.

Back Door (Power Back Door ECU):





Main Body (Body ECU):