Exhaust Manifold

EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY NO.2





Install the exhaust manifold converter No.2 with the 6 nuts and bolt. Using several steps, tighten the nuts uniformly in the sequence shown in the illustration.
Nut - Torque: 49 Nm (500 kgf-cm, 36 ft-lbf)
Bolt - Torque: 58 Nm (591 kgf-cm, 43 ft-lbf)
Retighten nuts 1 and 2 shown in the illustration.

EXHAUST MANIFOLD SUB-ASSEMBLY RH





Install a new gasket and the exhaust manifold RH with the 6 nuts. Using several steps, tighten the nuts uniformly in the sequence shown in the illustration.
Torque: 49 Nm (500 kgf-cm, 36 ft-lbf)
Retighten nuts 1 and 2 shown in the illustration.

MANIFOLD STAY
Temporarily install the manifold stay to the exhaust manifold and transaxle.
Fully tighten the 2 bolts.
Torque: 34 Nm (347 kgf-cm, 25 ft-lbf)