Hazard Warning Switch: Testing and Inspection

LIGHTING: HAZARD WARNING SWITCH:

INSPECTION

1. INSPECT HAZARD WARNING SWITCH (W/O LEXUS NAVIGATION SYSTEM)






(a) Remove the center cluster integration switch assembly.
(b) Measure the resistance according to the value(s) in the table below.
Resistance:





If the result is not as specified, replace the center cluster integration switch assembly (hazard warning switch).
2. INSPECT HAZARD WARNING SWITCH (W/ LEXUS NAVIGATION SYSTEM)






(a) Remove the multi-display assembly.
(b) Measure the resistance according to the value(s) in the table below.
Voltage:





If the result is not as specified, replace the multi-display assembly (hazard warning switch).