Removal

VOLTAGE INVERTER:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE REAR DOOR SCUFF PLATE LH Removal

3. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
4. REMOVE DECK BOARD SUB-ASSEMBLY Removal

5. REMOVE TONNEAU COVER ASSEMBLY
6. REMOVE JACK CARRIER SUPPORT
7. REMOVE JACK ASSEMBLY
8. REMOVE JACK CARRIER ASSEMBLY
9. REMOVE DECK FLOOR BOX FRONT Removal

10. REMOVE DECK FLOOR BOX REAR Removal

11. REMOVE DECK NO.2 BOARD SUB-ASSEMBLY Removal

12. REMOVE DECK NO.3 BOARD SUB-ASSEMBLY Removal

13. REMOVE BACK DOOR WEATHERSTRIP
14. REMOVE DECK SIDE TRIM BOX LH Removal

15. REMOVE DECK SIDE TRIM BOX RH
16. REMOVE REAR FLOOR FINISH PLATE Removal

17. REMOVE REAR FLOOR FINISH SIDE PLATE LH Removal

18. REMOVE DECK SIDE TRIM COVER LH Removal

19. SEPARATE REAR NO.1 SEAT BELT ASSEMBLY OUTER LH Removal

20. REMOVE REAR SEAT SIDE COVER LH Removal

21. REMOVE ROPE HOOK Removal

22. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH Removal

23. REMOVE VOLTAGE INVERTER






(a) Remove the 3 nuts and the voltage inverter.
(b) Disconnect the connector.