Removal

3MZ-FE EMISSION CONTROL: AIR FUEL RATIO SENSOR:

REMOVAL

1. REMOVE AIR FUEL RATIO SENSOR (for Bank 1)






(a) Disconnect the air fuel ratio sensor connector and clamp.






(b) Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly.
SST: 09224-00010
NOTE: Do not damage the air fuel ratio sensor.

2. REMOVE AIR FUEL RATIO SENSOR (for Bank 2)
(a) Disconnect the air fuel ratio sensor connector and clamp.






(b) Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly No.2.
SST: 09224-00010
NOTE: Do not damage the air fuel ratio sensor.