Removal

P310 HYBRID VEHICLE CONTROL: HYBRID VEHICLE CONTROL ECU:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE RH Removal

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal

4. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2 Removal

5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

6. REMOVE HYBRID VEHICLE CONTROL ECU
(a) Disconnect the 3 wire harness clamps.
(b) Disconnect the 6 connectors from the hybrid vehicle control ECU.

(a) Remove the 2 screws and ECM bracket No.1.
8. REMOVE ECM BRACKET NO.2

(a) Remove the 2 screws and ECM bracket No.2.
9. REMOVE WIRE HARNESS CLAMP BRACKET

(a) Remove the 2 screws and wire harness clamp bracket.