Installation

BRAKE CONTROL: SKID CONTROL ECU:

INSTALLATION

1. INSTALL SKID CONTROL ECU ASSEMBLY






(a) Temporarily install the skid control ECU assembly with the clip.
(b) Install the skid control ECU assembly with the 2 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)






(c) Install the skid control ECU assembly connectors.
2. INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY Installation

3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation

4. INSTALL FRONT DOOR SCUFF PLATE RH Installation

5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

6. INSTALL INSTRUMENT PANEL NO.2 UNDER COVER SUB-ASSEMBLY Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. PERFORM YAW RATE SENSOR ZERO POINT CALIBRATION Calibration

9. INSPECT VSC WARNING LIGHT Diagnosis System