Installation

STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU:

INSTALLATION

1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU






(a) Using a socket wrench (+), install the multiplex tilt and telescopic ECU with the 2 screws.
Torque: 1.5 Nm (15 kgf-cm, 13 in-lbf)
(b) Connect the connectors to the multiplex tilt and telescopic ECU.
NOTICE:
- The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape.
- When installing them, connect the connectors of the same color.

2. INSTALL STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY Reassembly

3. INSTALL STEERING COLUMN ASSEMBLY
HINT: Refer to the instructions for installation of the steering column assembly (power tilt and power telescopic) Installation