Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU:

INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU






(a) Connect the connector to the tire pressure warning ECU.






(b) Install the tire pressure warning ECU with the screw.
2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

3. INSTALL FRONT DOOR SCUFF PLATE RH






(a) Connect the connector. (w/illumination scuff plate)
(b) engage the 6 claws and 4 clips, and install the front door scuff plate RH.
4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. REGISTER TRANSMITTER ID
HINT: Registration

7. INITIALIZE SYSTEM
NOTICE:
- Be sure to register the transmitter IDs of all tires including the full-size spare tire in the ECU before initialization.
- Be sure to inflate all tires including the full-size spare tire to the proper inflation pressure before initialization.
HINT: Initialization

8. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: Test Mode Procedure