Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY:

REMOVAL

1. PRECAUTION
CAUTION: Be sure to read the "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

3. REMOVE FRONT SEAT ASSEMBLY Removal

4. REMOVE CONSOLE PANEL UPPER FRONT Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER Removal

6. REMOVE FRONT DOOR SCUFF LH PLATE Removal

7. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER Removal

8. REMOVE FRONT DOOR SCUFF RH PLATE
HINT: Use the same procedures for the front door scuff RH plate and the front door scuff LH plate.

9. REMOVE FRONT DOOR OPENING TRIM RH WEATHERSTRIP
10. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
HINT: Use the same procedures for the cowl side trim sub-assembly RH and the cowl side trim sub-assembly LH Removal.

11. REMOVE INSTRUMENT PANEL NO.2 UNDER COVER SUB-ASSEMBLY Removal

12. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

13. REMOVE FLOOR CARPET COVER CENTER LH Removal

14. REMOVE FLOOR CARPET COVER CENTER RH
HINT: Use the same procedures for the floor carpet cover center RH and the floor carpet cover center LH.

15. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER Removal

16. REMOVE CONSOLE BOX HOLE COVER Removal

17. REMOVE CONSOLE BOX NO.2 HOLE COVER
HINT: Use the same procedures for the console box No.2 hole cover and the console box hole cover.

18. REMOVE REAR CONSOLE BOX Removal

19. REMOVE CONSOLE BOX NO.1 DUCT
20. REMOVE CONSOLE COVER LOWER






(a) Remove the 2 screws.
(b) Disconnect the connector and remove the console cover lower.
21. REMOVE AIR DUCT REAR NO.2 Removal

22. REMOVE AIR DUCT REAR NO.1 Removal

23. REMOVE CENTER AIRBAG SENSOR ASSEMBLY






(a) Disconnect the 3 connectors from the center airbag sensor assembly.
(b) Remove the 3 bolts and the center airbag sensor assembly.