Removal

BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR:

REMOVAL
HINT:
- Do not use a dropped or damaged yaw rate sensor.
- Prevent foreign matter from attaching between the yaw rate sensor bracket and body.
- Confirm that the sensor direction is correct.

1. REMOVE SEAT TRACK BRACKET COVER OUTER FRONT LH Removal

2. REMOVE SEAT TRACK BRACKET COVER INNER FRONT LH Removal

3. REMOVE SEAT TRACK COVER RH Removal

4. REMOVE SEAT TRACK COVER LH Removal

5. REMOVE FRONT SEAT ASSEMBLY RH Removal

6. REMOVE SHIFT LEVER KNOB Removal

7. REMOVE CONSOLE PANEL UPPER FRONT Removal

8. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER Removal

9. REMOVE FRONT DOOR SCUFF PLATE RH Removal

10. REMOVE FRONT DOOR SCUFF PLATE LH Removal

11. REMOVE REAR DOOR SCUFF PLATE RH
12. REMOVE CENTER PILLAR GARNISH LOWER RH
13. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal

14. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal

15. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER Removal

16. REMOVE INSTRUMENT PANEL NO.2 UNDER COVER SUB-ASSEMBLY Removal

17. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

18. REMOVE FLOOR CARPET COVER CENTER LH Removal

19. REMOVE FLOOR CARPET COVER CENTER RH Removal

20. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER Removal

21. REMOVE CONSOLE BOX HOLE COVER Removal

22. REMOVE CONSOLE BOX HOLE NO.2 COVER Removal

23. REMOVE CONSOLE BOX ASSEMBLY Removal

24. REMOVE CONSOLE COVER LOWER Removal

25. REMOVE YAW RATE SENSOR ASSEMBLY






(a) Turn back the floor carpet, and remove the bolt, nut, clamp and yaw rate sensor assembly.
(b) Disconnect the yaw rate sensor assembly connector.
NOTE: Do not remove the yaw rate sensor assembly from the yaw rate sensor bracket.