Installation

CRUISE CONTROL MAIN SWITCH:

INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH






(a) Install the cruise control main switch with the 2 screws.
Torque: 2.4 Nm (25 kgf-cm, 21 in-lbf)
(b) Connect the connector.
2. INSTALL STEERING PAD Installation

3. INSTALL STEERING WHEEL NO.3 COVER LOWER Installation

4. INSTALL STEERING WHEEL NO.2 COVER LOWER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT STEERING PAD Steering Pad

7. PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal. Repair Instruction - Initialization

8. INSPECT SRS WARNING LIGHT
Diagnosis System