Connecting Rod, Engine
Connecting RodThrust clearance
STD 0.15 to 0.30mm (0.0059 to 0.0118 in.)
Maximum 0.35 mm (0.0138 in.)
Connecting rod thickness 0.80 to 20.85 mm (0.8189 to 0.08209 in.)
Connecting rod oil clearance
STD 0.038 to 0.066 mm (0.0015 to 0.0026 in.)
Maximum 0.08 mm (0.0031 in.)
Connecting rod bearing center wall thickness
Mark1 1.484 to 1.487 mm (0.0584 to 0.0585 in.)
Mark2 1.488 to 1.490 mm (0.0586 to 0.0587 in.)
Mark3 1.491 to 1.493 mm (0.0587 to 0.0588 in.)
Mark4 1.494 to 1.496 mm (0.0588 to 0.0589 in.)
Maximum misalignment per 100 mm (3.94 in.) 0.05 mm (0.0020 in.) per 100 mm (3.94 in.)
Maximum rod twist per 100 mm (3.94 in.) 0.15 mm (0.0059 in.) per 100 mm (3.94 in.)
Connecting rod cap x Connecting rod
1st 25 Nm (255 kgf-cm, 18 ft. lbf)
2nd Turn 90°