Installation

REAR POWER OUTLET SOCKET:

INSTALLATION

1. INSTALL POWER OUTLET SOCKET COVER REAR






(a) Engage the 2 claws and install the power outlet socket cover rear.
2. INSTALL REAR POWER POINT SOCKET






(a) Place the rear power point socket with the notch on the power point socket cover, and push in the rear power point socket as hard as possible to install it.
3. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH Installation

4. INSTALL NO.1 TONNEAU COVER HOLDER CAP
5. INSTALL NO.2 ROOM LIGHT ASSEMBLY Installation

6. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH Installation

7. INSTALL ROPE HOOK Installation

8. INSTALL REAR SEAT SIDE COVER LH Installation

9. INSTALL REAR NO.1 SEAT OUTER BELT ASSEMBLY LH Installation

10. INSTALL DECK SIDE TRIM COVER LH Installation

11. INSTALL REAR FLOOR FINISH SIDE PLATE LH Installation

12. INSTALL REAR FLOOR FINISH PLATE Installation

13. INSTALL DECK SIDE TRIM BOX LH Installation

14. INSTALL DECK SIDE TRIM BOX RH
15. INSTALL BACK DOOR WEATHERSTRIP
16. INSTALL NO.3 DECK BOARD SUB-ASSEMBLY Installation

17. INSTALL NO.2 DECK BOARD SUB-ASSEMBLY Installation

18. INSTALL DECK FLOOR BOX REAR Installation

19. INSTALL DECK FLOOR BOX FRONT Installation

20. INSTALL JACK CARRIER ASSEMBLY
21. INSTALL JACK ASSEMBLY
22. INSTALL JACK CARRIER SUPPORT
23. INSTALL TONNEAU COVER ASSEMBLY
24. INSTALL DECK BOARD SUB-ASSEMBLY Installation

25. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
26. INSTALL REAR DOOR SCUFF PLATE LH Installation