Initial Inspection and Diagnostic Overview

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM:

HOW TO PROCEED WITH TROUBLESHOOTING

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. CUSTOMER PROBLEM ANALYSIS
NEXT -- Continue to next step.
3. CHECK DTC OF NAVIGATION SYSTEM
(a) Refer to the diagnostic check/clear of the navigation system Reading and Clearing Diagnostic Trouble Codes.
-- DTC IS OUTPUT (Go to navigation system)
-- DTC IS NOT OUTPUT (Go to step 4)
4. PROBLEM SYMPTOM CONFIRMATION
-- SYMPTOM DOES NOT OCCUR (Go to step 5)
-- SYMPTOM OCCURS (Go to step 6)
5. SYMPTOM SIMULATION
NEXT -- Continue to next step.
6. CHECK IF THE SAME SYMPTOM APPEARS IN THE NAVIGATION SYSTEM
(a) Refer to the navigation system Problem Symptoms Table.
-- THE SYMPTOM APPEARS (FOLLOW THE NAVIGATION SYMPTOM CHART TO PERFORM TROUBLESHOOTING)
-- THE SYMPTOM DOES NOT APPEAR (Go to step 7)
7. PROBLEM SYMPTOMS TABLE
(a) Refer to the problem symptoms table Symptom Related Diagnostic Procedures.
-- THE CORRESPONDING SYMPTOM EXISTS (Go to step 9)
-- THE CORRESPONDING SYMPTOM DOES NOT EXIST (Go to step 8)
8. BASED ON THE MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW
(a) Terminals of ECU Pinout Values and Diagnostic Parameters.
NEXT -- Continue to next step.
9. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.
10. CONFIRMATION TEST
NEXT -- END