Removal

P310 HYBRID BATTERY CONTROL: BATTERY BLOWER:

REMOVAL

1. PRECAUTION
Service Precautions
2. READ OUTPUT DTC Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
4. REMOVE SERVICE PLUG GRIP Removal

5. REMOVE REAR SEAT TRACK BRACKET COVER Removal

6. REMOVE REAR SEAT ASSEMBLY LH Removal

7. REMOVE REAR SEAT TRACK BRACKET COVER Removal

8. REMOVE REAR SEAT ASSEMBLY RH Removal

9. REMOVE AIR INTAKE COVER Removal

10. REMOVE AIR INTAKE COVER CENTER Removal

11. SEPARATE FLOOR CARPET ASSEMBLY FRONT Removal

12. REMOVE REAR CENTER SEAT INNER BELT Removal

13. REMOVE BATTERY CARRIER BRACKET Removal

14. REMOVE BATTERY CARRIER DUCT Removal

15. REMOVE HV BATTERY SERVICE HOLE COVER Removal

16. REMOVE BATTERY COVER SUB-ASSEMBLY Removal

17. REMOVE BATTERY COOLING BLOWER ASSEMBLY
NOTE: Wear insulating gloves and protective glasses.





(a) Disconnect each battery cooling blower assembly connector and clamp.






(b) Remove the 9 nuts and 3 battery cooling blower assemblies.