Personal Light Assembly

LIGHTING: PERSONAL LIGHT ASSEMBLY:

INSPECTION

1. INSPECT PERSONAL LIGHT ASSEMBLY






(a) Remove the personal light assembly.
(b) Connect the battery positive (+) lead to terminal 17 and negative (-) lead to terminal 6.
(c) Turn the personal light switch in DOOR position.
(d) Check that the light comes on.
(e) Connect the battery positive (+) lead to terminal 17 and negative (-) lead to terminal 5.
(f) Turn the personal light switch in ON position.
(g) Check that the light comes on.
OK:
Comes on
If the light does not come on, replace the personal light assembly.