Scan Tool Testing and Procedures

SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM:

DATA LIST / ACTIVE TEST
HINT: Using Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

1. DATA LIST FOR CENTER AIRBAG SENSOR ASSEMBLY
(a) Turn the ignition switch to the LOCK position.
(b) Connect Techstream to the DLC3.
(c) Turn the ignition switch to the ON position.
(d) Turn the tester on.
(e) Enter the following menus: Body Electrical / SRS Airbag / Data List.
(f) Check the values by referring to the table below.

DATA LIST: