Transaxle Fluid

P310 HYBRID TRANSMISSION / TRANSAXLE: HYBRID TRANSAXLE FLUID: REPLACEMENT

REPLACEMENT

1. DRAIN HYBRID TRANSAXLE FLUID






(a) Using a socket hexagon wrench 10 mm, remove the filler plug and gasket.
(b) Using a socket hexagon wrench 10 mm, remove the drain plug and gasket.
(c) Using a socket hexagon wrench 10 mm, install the drain plug, and a new gasket.
Torque: 39 Nm (398 kgf-cm, 29 ft-lbf)
2. ADD AND INSPECT HYBRID TRANSAXLE FLUID (w/o Oil Cooler)
(a) Fill oil.






(b) Check that the oil surface is within 5 mm (0.20 in.) from the lowest position of the inner surface of the differential filler plug opening.
- Stop the vehicle on a flat road.
- Recheck the transaxle oil level after driving when exchanging oil.
- Insufficient or excessive amounts of transaxle oil may be the cause of some trouble.

(c) Check for leaks if the quantity of oil is low.
(d) Using a socket hexagon wrench 10 mm, install the filler plug, and a new gasket.
Torque: 39 Nm (398 kgf-cm, 29 ft-lbf)
3. ADD AND INSPECT HYBRID TRANSAXLE FLUID (w/ Oil Cooler)
(a) Fill oil.






(b) Check that the oil surface is within 5 mm (0.20 in.) from the lowest position of the inner surface of the differential filler plug opening.
- Keep the oil temperature at 5°C (41°F) or higher.
- Stop the vehicle on a flat road.
- Insufficient or excessive amounts of transaxle oil may be the cause of some trouble.

(c) Using a socket hexagon wrench 10 mm, temporarily tighten the filler plug and gasket.
(d) Set the vehicle to 2WD inspection mode. Service Precautions

(e) After waiting for 1 minute or more, stop the engine.
(f) Using a socket hexagon wrench 10 mm, remove the filler plug and gasket.
(g) Fill oil.






(h) Check that the oil surface is within 5 mm (0.20 in.) from the lowest position of the inner surface of the differential filler plug opening.
- Keep the oil temperature at 5°C (41°F) or higher.
- Stop the vehicle on a flat road.
- Recheck the transaxle oil level after driving when exchanging oil.
- Insufficient or excessive amounts of transaxle oil may be the cause of some trouble.

(i) Check for leaks if the quantity of oil is low.
(j) Using a socket hexagon wrench 10 mm, install the filler plug, and a new gasket.
Torque: 39 Nm (398 kgf-cm, 29 ft-lbf)