Up to 08/2009
DOOR / HATCH: BACK DOOR CLOSER SYSTEM: B2250: Back Door Closer Operation Malfunction
B2250 - Back Door Closer Operation Malfunction
DESCRIPTION
The power back door ECU (power back door motor unit) receives signals from the latch switch, sector switch, back door courtesy switch and pawl switch, which are built into the back door lock. Based on these switch signals, the latch position of the back door lock is determined.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. INSPECT BACK DOOR LOCK ASSEMBLY (SECTOR SWITCH)
(a) Remove the back door lock assembly Removal.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE BACK DOOR LOCK ASSEMBLY Removal
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (BACK DOOR LOCK - POWER BACK DOOR ECU)
(a) Disconnect the Y10 back door lock connector and P33 ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE POWER BACK DOOR ECU (POWER BACK DOOR MOTOR UNIT) Removal