Up to 08/2009
CRUISE CONTROL: DYNAMIC RADAR CRUISE CONTROL SYSTEM: P1578: Brake System Malfunction
P1578 - Brake System Malfunction
DESCRIPTION
This DTC is output when the VSC system has a problem. Check the VSC system when this DTC is output.
HINT
This circuit uses CAN communication. Therefore, if there are any malfunctions in the communication circuit, one or more DTCs in the CAN communication system are output.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK DTC (VEHICLE STABILITY CONTROL SYSTEM)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Codes.
(e) Check for DTCs.
Result:
B -- GO TO VEHICLE STABILITY CONTROL SYSTEM (DTC CHART) Vehicle Stability Control System
A -- REPLACE ECM Components