From 08/2009
DOOR LOCK: DOOR CONTROL RECEIVER: REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
3. REMOVE REAR SEAT HEADREST ASSEMBLY RH Removal
4. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY Removal
5. REMOVE REAR SEAT TRACK BRACKET COVER RH Removal
6. DISCONNECT REAR SEAT LOCK CABLE ASSEMBLY RH Removal
7. REMOVE REAR SEAT ASSEMBLY RH Removal
8. REMOVE DECK BOARD SUB-ASSEMBLY Removal
9. REMOVE SPARE WHEEL COVER ASSEMBLY (for Compact Spare Tire) Removal
10. REMOVE TONNEAU COVER ASSEMBLY Removal
11. REMOVE NO. 3 REAR FLOOR BOARD (for Compact Spare Tire) Removal
12. REMOVE NO. 3 REAR FLOOR BOARD (for Full Size Spare Tire) Removal
13. REMOVE DECK SIDE TRIM BOX RH (for Compact Spare Tire) Removal
14. REMOVE DECK SIDE TRIM BOX RH (for Full Size Spare Tire) Removal
15. REMOVE REAR FLOOR FINISH PLATE Removal
16. REMOVE REAR FLOOR FINISH SIDE PLATE RH
HINT
Use the same procedure for the RH side and LH side Removal.
17. REMOVE REAR DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and LH side Removal.
18. REMOVE REAR SEAT SIDE COVER RH
HINT
Use the same procedure for the RH side and LH side Removal.
19. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
HINT
Use the same procedure for the RH side and LH side Removal.
20. REMOVE ROPE HOOK ASSEMBLY
HINT
Use the same procedure for the RH side and LH side Removal.
21. REMOVE RECLINING REMOTE CONTROL BEZEL RH
HINT
Use the same procedure for the RH side and LH side Removal.
22. REMOVE HEIGHT CONTROL SWITCH (w/ Air Suspension) Removal
23. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH Removal
24. REMOVE DOOR CONTROL RECEIVER
(a) Disconnect the connector.
(b) Remove the bolt and door control receiver.