Up to 08/2009

PARK ASSIST / MONITORING: TELEVISION CAMERA (for Rear Side): INSTALLATION

1. INSTALL REAR TELEVISION CAMERA ASSEMBLY

(a) Install the rear television camera assembly with the bolt and nut.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the connector.

2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY Reassembly

3. INSTALL BACK DOOR SERVICE HOLE COVER RH Reassembly

4. INSTALL BACK DOOR SERVICE HOLE COVER LH Reassembly

5. INSTALL BACK DOOR UPPER TRIM COVER RH Reassembly

6. INSTALL BACK DOOR UPPER TRIM COVER LH Reassembly

7. INSTALL NO. 2 ROOM LIGHT ASSEMBLY Installation

8. INSTALL BACK DOOR LOCK COVER Reassembly

9. INSTALL DOOR PULL HANDLE WITH SWITCH (w/ Power Back Door) Reassembly

10. INSTALL BACK DOOR FINISH COVER RH (w/o Power Back Door) Reassembly

11. INSTALL BACK DOOR TRIM BASE (w/ Power Back Door) Reassembly

12. INSTALL BACK DOOR FINISH COVER LH (w/o Power Back Door) Reassembly

13. INSTALL TONNEAU COVER SUB-ASSEMBLY

14. ADJUST REAR TELEVISION CAMERA OPTICAL AXIS (CAMERA POSITION SETTINGS) (w/ Parking Assist Monitor System)

Calibration