Up to 08/2009

DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: INSTALLATION

1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

(a) Pass the hood lock control cable assembly into the engine compartment.

Text in Illustration

(b) Pass the cable through the upper radiator support.

(c) Engage the clamps as shown in the illustration.

2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

(a) Connect the hood lock control cable assembly to install the hood lock control lever sub-assembly.

(b) Engage the 3 claws and install the hood lock control lever sub-assembly.

3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

4. INSTALL HOOD LOCK ASSEMBLY

(a) Apply MP grease to the sliding areas of the lock.

(b) Connect the hood lock control cable assembly.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(e) Install a new hood lock nut cap.

5. INSTALL HOOD LOCK CONTROL CABLE COVER

(a) Engage the clamp.

(b) Install the hood lock control cable cover with the 3 screws.

6. INSTALL LOW PITCHED HORN ASSEMBLY Installation

7. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System) Installation

8. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY Installation

9. INSTALL FRONT SHOCK ABSORBER CAP LH (w/ Air Suspension) Installation

10. INSTALL FRONT SHOCK ABSORBER CAP RH (w/ Air Suspension)

HINT
Use the same procedure for the RH side and LH side.

11. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Installation

12. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Installation

13. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH Installation

14. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH Installation

15. INSTALL FRONT WIPER ARM HEAD CAP Installation

16. INSTALL FRONT FENDER TO COWL SIDE SEAL LH Installation

17. INSTALL FRONT FENDER TO COWL SIDE SEAL RH Installation

18. INSTALL FRONT FENDER TOP REINFORCEMENT SUB-ASSEMBLY LH Installation

19. INSTALL FRONT FENDER TOP REINFORCEMENT SUB-ASSEMBLY RH Installation

20. INSTALL FRONT BUMPER ASSEMBLY Installation

21. INSTALL HOOD CENTER CUSHION Installation

22. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System) Adjustments

23. INSTALL COOL AIR INTAKE DUCT SEAL Installation

24. INSTALL ENGINE ROOM SIDE COVER Installation

25. INSTALL ENGINE ROOM SIDE COVER LH Installation

26. ADJUST FOG LIGHT AIMING

Adjustments

27. ADD WASHER FLUID (w/ Headlight Cleaner System) Installation

28. INSPECT HOOD SUB-ASSEMBLY Testing and Inspection

29. ADJUST HOOD SUB-ASSEMBLY

Adjustments