Up to 08/2009

THEFT DETERRENT / KEYLESS ENTRY: ENTRY LOCK AND UNLOCK SWITCH: INSTALLATION

1. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY

(a) Insert the front end of the front door outside handle assembly into the front door outside handle frame.





(b) Insert the rear end of the front door outside handle assembly into the front door outside handle frame, then slide the front door outside handle assembly toward the front of the vehicle to install it.

(c) Move the lever back in the direction indicated by the arrow in the illustration to lock the door outside handle assembly.





(d) Connect the connector.





(e) Engage the 2 claws.

2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER (for Front Passenger Side) Reassembly

3. INSTALL FRONT DOOR OUTSIDE HANDLE COVER WITH LOCK CYLINDER ASSEMBLY (for Driver Side) Reassembly

4. INSTALL FRONT DOOR GLASS RUN Reassembly

5. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY Reassembly

6. INSTALL FRONT DOOR SERVICE HOLE COVER Reassembly

7. INSTALL NO. 1 FRONT DOOR TRIM BRACKET Reassembly

8. INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY Installation

9. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY Installation

10. INSTALL DOOR FRAME GARNISH Reassembly

11. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP Reassembly

12. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Reassembly

13. INSTALL NO. 1 FRONT DOOR STIFFENER CUSHION Reassembly

14. INSTALL COURTESY LIGHT ASSEMBLY Installation

15. INSTALL DOOR ARMREST COVER Reassembly

16. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Reassembly

17. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Installation

18. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG Reassembly

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.