From 08/2009
DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION
1. INSTALL DOOR CONTROL RECEIVER
(a) Install the door control receiver with the bolt.
(b) Connect the connector.
2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH Installation
3. INSTALL HEIGHT CONTROL SWITCH (w/ Air Suspension) Installation
4. INSTALL RECLINING REMOTE CONTROL BEZEL RH
HINT
Use the same procedure for the RH side and LH side Installation.
5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
HINT
Use the same procedure for the RH side and LH side Installation.
6. INSTALL ROPE HOOK ASSEMBLY
HINT
Use the same procedure for the RH side and LH side Installation.
7. INSTALL REAR SEAT SIDE COVER RH
HINT
Use the same procedure for the RH side and LH side Installation.
8. INSTALL REAR DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and LH side Installation.
9. INSTALL REAR FLOOR FINISH SIDE PLATE RH
HINT
Use the same procedure for the RH side and LH side Installation.
10. INSTALL REAR FLOOR FINISH PLATE Installation
11. INSTALL DECK SIDE TRIM BOX RH (for Compact Spare Tire) Installation
12. INSTALL DECK SIDE TRIM BOX RH (for Full Size Spare Tire) Installation
13. INSTALL NO. 3 REAR FLOOR BOARD (for Compact Spare Tire) Installation
14. INSTALL NO. 3 REAR FLOOR BOARD (for Full Size Spare Tire) Installation
15. INSTALL TONNEAU COVER ASSEMBLY Installation
16. INSTALL SPARE WHEEL COVER ASSEMBLY (for Compact Spare Tire) Installation
17. INSTALL DECK BOARD SUB-ASSEMBLY Installation
18. INSTALL REAR SEAT ASSEMBLY RH Installation
19. CONNECT REAR SEAT LOCK CABLE ASSEMBLY RH Installation
20. INSPECT REAR SEAT SLIDE ADJUSTER LOCK Installation
21. INSTALL REAR SEAT TRACK BRACKET COVER RH Installation
22. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY Installation
23. INSTALL REAR SEAT HEADREST ASSEMBLY RH Installation
24. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
25. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)
Test Mode Procedure