Up to 08/2009

DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR: INSTALLATION

1. INSTALL POWER BACK DOOR TOUCH SENSOR ASSEMBLY

(a) Engage the clip.





(b) Install the power back door touch sensor assembly with the 4 screws.

Torque : 3.5 Nm (36 kgf-cm, 31 in-lbf)

(c) Connect the connector.

2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY Reassembly

3. INSTALL BACK DOOR SERVICE HOLE COVER LH Reassembly

4. INSTALL BACK DOOR SERVICE HOLE COVER RH Reassembly

5. INSTALL BACK DOOR UPPER TRIM COVER LH Reassembly

6. INSTALL BACK DOOR UPPER TRIM COVER RH Reassembly

7. INSTALL NO. 2 ROOM LIGHT ASSEMBLY Installation

8. INSTALL BACK DOOR LOCK COVER Reassembly

9. INSTALL BACK DOOR TRIM BASE Reassembly

10. INSTALL DOOR PULL HANDLE WITH SWITCH Reassembly

11. INSTALL TONNEAU COVER SUB-ASSEMBLY