Replacement

2GR-FE ENGINE MECHANICAL: CYLINDER BLOCK: REPLACEMENT

1. REPLACE STRAIGHT PIN

(a) Using a plastic hammer, tap in new straight pins to the cylinder block.





Standard Protrusion:





2. REPLACE STUD BOLT

(a) Using an E8 and E10 "TORX" sockets, install the stud bolts.





Bolt A - Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

Bolt B - Torque : 17 Nm (173 kgf-cm, 13 ft-lbf)