Up to 08/2009

HEATING / AIR CONDITIONING: AIR CONDITIONING PANEL: INSTALLATION

1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (RADIO RECEIVER ASSEMBLY)

2. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

3. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

4. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY Installation

5. INSTALL RADIO RECEIVER ASSEMBLY WITH REGISTER Installation

6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation

7. INSTALL INSTRUMENT PANEL FINISH PANEL Installation

8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

9. INSTALL NO. 1 SWITCH HOLE BASE Installation

10. INSTALL INSTRUMENT PANEL GARNISH LH Installation

11. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

14. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)

(a) Inspect the suspension control system Test Mode Procedure.