Up to 08/2009

LIGHTING (INT): GLOVE BOX LIGHT: INSTALLATION

1. INSTALL GLOVE BOX LIGHT ASSEMBLY

(a) Engage the 2 claws to install the glove box light assembly.





2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

4. INSTALL INSTRUMENT PANEL GARNISH RH

HINT
Use the same procedure for the RH side and LH side Installation.

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side Installation.

7. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side Installation.

8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation

9. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.