Dome Lamp: Testing and Inspection

LIGHTING (INT): ROOM LIGHT: INSPECTION

1. INSPECT SPOT LIGHT ASSEMBLY

(a) Inspect the rear personal lights.

(1) Connect a positive (+) lead from the battery to terminal 4 (ILLB) and a negative (-) lead to terminal 3 (RGND).





(2) Check that the rear personal lights come on as shown in the table below.

OK:





Text in Illustration





(2) If the result is not as specified, replace the spot light assembly.

(b) Inspect the rear interior light.

(1) Connect a positive (+) lead from the battery to terminal 4 (ILLB) and a negative (-) lead to terminal 2 (CTY).

(2) Check that the rear interior light comes on.

OK:

Rear interior light comes on.

(2) If the result is not as specified, replace the spot light assembly.