Up to 08/2009

LIGHTING (EXT): HIGH INTENSITY DISCHARGE HEADLIGHT BULB: INSTALLATION

1. INSTALL DISCHARGE HEADLIGHT BULB

(a) Lock the set spring to install the discharge headlight bulb in the direction indicated by the arrow shown in the illustration.





NOTICE:
Do not touch the bulb glass.

(b) Turn the light control ECU socket in the direction indicated by the arrow shown in the illustration to connect it.





2. INSTALL NO. 1 HEADLIGHT BACK COVER

(a) Turn the No. 1 headlight back cover in the direction indicated by the arrow shown in the illustration to install it.





3. INSTALL COOL AIR INTAKE DUCT SEAL (for LH Side) Installation

4. INSTALL ENGINE ROOM SIDE COVER Installation

5. INSTALL ENGINE ROOM SIDE COVER LH (for LH Side) Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.